Chemfil
3258 Marentette Avenue
Windsor, ON N8X 4G4
800.265.5057519.969.5570

Water Treatment

home > our products > water treatment

Chemfil provides a full line-up of waste water management solutions that can be used in continuous and batch Waste Water Treatment processes.

original

BactiZyme® Bio-Max

A biological dissolving block for breaking down grease and other organic matter.

The product contains specially selected bacterial strains to digest cellulose, fat, oils, greases, proteins and starch through enzymatic metabolism in wastewater treatment.

BactiZyme® Bio-Max’s primary application is in sewage pumping stations, wet wells, grease traps and other low oxygen environments where unpleasant odours and unhygienic conditions are considered a problem and are typically treated with aggressive chemicals or mechanical removal.

BactiZyme® Bio-Max eliminates FOG’s (fats, oils and greases) and therefore keeps the drains clear, ensuring pumping stations are left working at maximum efficiency.

BactiZyme® Bio-Max also helps eliminate other organic matter that causes water discolouration and smells that may arise in a water system from different sources.

original

BACTIZYME® BIO-BREEZE

BactiZyme® Bio-Breeze outdoor toilet treatment is safe for all outdoor toilets.

BactiZyme® Bio-Breeze is a natural biological treatment for degrading
organic matter and removal of odours in outdoor toilets.

• Controls odours
• Dissolves all organic matter
• Eliminates the need for hazardous chemicals
• Reduces BODs and CODs
• Phosphate free

original

BACTIZYME® BIO-DRAIN

Drain cleaner that is safe for all sinks and drains.

Drain cleaner that is safe for all sinks and drains.

A blend of naturally occurring microbes carefully selected to digest fats,oil, grease and other organic waste to keep grease traps, drains and waste water systems clear.
Regular dosing with BactiZyme® Bio-Drain will:

• Prevent blockages and the source of foul odour
• Eliminate the need for hazardous chemicals
• Eliminate the need to unblock grease by rodding
• Reduce BODs and CODs
• Phosphate free

 

original

BACTIZYME® BIO-FLUSH

A drain unblocker that uses non-chemical and environmentally friendly bacteria and enzymes to break down organic waste.

BactiZyme® Bio-Flush is an effective enzymatic treatment for breaking down organic waste and subsequently, unblocking the drains. The product is readily biodegradable, non-flammable and entirely non-toxic but most importantly, the selected enzymes are friendly to the environment and are entirely ‘green’.To help maintain a trouble free drain,use BactiZyme® Bio-Drain on a regular basis.

original

BactiZyme® Bio-Puck (Urinal Block)

A citrus fragranced urinal puck made with billions of naturally-occurring, ‘friendly’ bacteria which have a unique benefit of consuming uric acid thus reducing water needs and eliminating the chance of scaling the urinal trap.

So what does our technology do?

  • Just drop a puck in each urinal. They last about 4+ weeks.
  • Friendly bacteria digest the stuff that causes odours and blockages.
  • The enzymes released by the block reduce limescale and uric acid build up.
  • The block also releases a pleasant citrus fragrance.
  • The system helps to protect the environment by drastically reducing the amount of water used in a washroom environment.
  • There are no installation charges.
  • Designed to fit all urinals.
  • The friendly bacteria are completely safe and natural and are completely environmentally friendly – unlike the chemicals often used in toilets.*1 variables include: flush volumes, flush frequencies and water charges between different water suppliersLess water – less odoursOdour is a problem with waterless urinals with most manufacturers offering a countermeasure, usually in the form of a scented block, stick, pad or automatic air fresheners. In reality, odours are usually caused by trap leaks or general hygiene problems around the urinals rather than the lack of water.The new system can help to overcome these problems. In addition:
    • No plumbing changes are required
    • Consistent fragrance over the life of the Bio-Puck
    • Breakdown of uric acid and scale which cause blockages
    • Help in overcoming the big issue of ODOURS

original

CHEMFLOC 300

Water treatment polymer for flocculating solids.

Details
  • High molecular weight.
  • Exceptional freeze-thaw recovery.
  • Rapid dissolution to form viscous gel-free solutions
Process
  • Polymer

original

CHLORINE SANI 12

CHLORINE SANI 12 is a strong concentrated sanitizer for algae and bacteria control.

DESCRIPTION

  • CHLORINE SANI 12 is a strong concentrated sanitizer for algae and bacteria control.
  • CHLORINE SANI 12 is a sodium hypochlorite based product, which is used in open recirculating systems such as cooling towers and air washers.

 

ADVANTAGES

  • CHLORINE SANI 12 has sanitizing properties that will effectively eliminate all microbiological activity.
  • It is an environmentally friendly, ready to use product.

For processes requiring DIN approval, use EZ GUARD™ CHLORINE 12.

original

CHLORINE SANI 6

CHLORINE SANI 6 is a strong concentrated sanitizer for algae and bacteria control.

DESCRIPTION

  • CHLORINE SANI 6 is a medium strength stabilized sanitizer for algae and bacteria control.
  • CHLORINE SANI 6 is a sodium hypochlorite based product, which is used in open recirculating systems such as cooling towers and air washers.

ADVANTAGES

  • CHLORINE SANI 6 has sanitizing properties that will effectively eliminate all microbiological activity.
  • It is an environmentally friendly, ready to use product.

Contact your Chemfil service rep today for a formal quote.

original

DRAINBLAST

A drain unblocker that uses traditional caustic technology to break down organic waste.

Drainblast is an effective traditional liquid caustic treatment for breaking down organic waste and subsequently, unblocking the drains. The product is readily biodegradable and non-flammable.  To help maintain a trouble free drain,use BactiZyme® Bio-Drain on a regular basis.

original

EZ GUARD™ 7330

EZ GUARD 7330 is a nonionic, broad-spectrum, water-soluble microbicide for use in industrial and commercial recirculating cooling systems, air washers and pasteurizer systems.

DESCRIPTION

  • EZ GUARD 7330 is a nonionic, broad-spectrum, water-soluble microbicide for use in industrial and commercial recirculating cooling systems, air washers and pasteurizer systems.
  • This isothiazolin-based biocide maintains control of microorganisms at concentrations of as low as 1 ppm (active) resulting in cost effective application and reduced dosing cost.

 

ADVANTAGES

  • EZ GUARD 7330 is persistent in the water systems, effective at low concentrations, compatible with other inhibitors and effective over a broad pH range.
  • EZ GUARD 7330 is effective over a broad pH range and remains persistent in the water system providing microbiological control over an extended period.
  • When diluted below use concentrations, EZ GUARD 7330 is readily biodegradable and is easily deactivated when necessary.

Contact your Chemfil service rep today for a formal quote.

original

EZ GUARD™ 8005

EZ GUARD™ 8005 is a concentrated liquid treatment formulated to control solids deposition and scale formation in low and medium pressure boilers up to 900 psi.

DESCRIPTION

  • EZ GUARD™ 8005 is a concentrated liquid treatment formulated to control solids deposition and scale formation in low and medium pressure boilers up to 900 psi.
  • EZ GUARD™ 8005 contains organic dispersants, sludge conditioners, phosphonates, sequestrants and anti-precipitants.

 

ADVANTAGES

  • EZ GUARD™ 8005 has an excellent specific iron dispersant and sequestrant.
  • In many applications continued use of EZ GUARD™ 8005 will also effectively remove existing deposits.

 

Contact your Chemfil service rep today for a formal quote.

original

EZ GUARD™ 8137

EZ GUARD™ 8137 is a concentrated liquid blend of neutralizing amines formulated to prevent low pH corrosion (grooving) in condensate recovery systems.

DESCRIPTION

  • EZ GUARD™ 8137 is a concentrated liquid blend of neutralizing amines formulated to prevent low pH corrosion (grooving) in condensate recovery systems.
  • This product contains amines of different distribution ratios selected to offer protection to all areas in large steam/condensate recovery systems.

 

ADVANTAGES

  • EZ GUARD™ 8137 can be fed neat as received or diluted with soft water to any convenient strength.
  • EZ GUARD™ 8137 is compatible with most boiler treatment chemicals and can normally be added in a common mix tank.

 

Contact your Chemfil service rep today for a formal quote.

original

EZ GUARD™ 8176

EZ GUARD™ 8176 is a concentrated blended liquid oxygen scavenger formulated to control oxygen “pitting” corrosion in low and medium pressure boiler systems.

DESCRIPTION

  • EZ GUARD™ 8176 is a concentrated blended liquid oxygen scavenger formulated to control oxygen “pitting” corrosion in low and medium pressure boiler systems.

 

ADVANTAGES

  • EZ GUARD™ 8176 is catalyzed to reduce reaction time and enhance equipment protection.

 

Contact your Chemfil service rep today for a formal quote.

original

EZ GUARD™ 8325

EZ GUARD™ 8325 is a concentrated blended liquid corrosion inhibitor and deposition preventative formulated for use in open recirculating evaporative cooling systems.

DESCRIPTION

  • EZ GUARD™ 8325 is a concentrated blended liquid corrosion inhibitor and deposition preventative formulated for use in open recirculating evaporative cooling systems.

 

ADVANTAGES

  • EZ GUARD™ 8325 offers corrosion protection to all system metallurgies and controls solids deposition on heat exchange surfaces, to ensure efficient operation.
  • EZ GUARD™ 8325 is all organic, biodegradable and environmentally friendly.
  • EZ GUARD™ 8325 is CFIA approved for use in establishments operating under the authority of the agency.

 

Contact your Chemfil service rep today for a formal quote.

original

EZ GUARD™ 8362

EZ GUARD 8362 is a concentrated liquid blend of treatment chemicals for dispersing applications.

DESCRIPTION

  • EZ GUARD 8362 is a concentrated liquid blend of treatment chemicals for dispersing applications.
  • EZ GUARD 8362 serves to remove traces of bio and bacterial film traces in open recirculating systems and evaporative cooling systems.
  • EZ GUARD 8362 controls solid deposition across heat exchanging surfaces.
  • It contains organic and inorganic dispersants, and anti-precipitants.

 

ADVANTAGES

  • EZ GUARD 8362 will ensure that all bacterial traces are broken down into small droplets and dispersed throughout the water.
  • In many applications, it is typically followed up with a biocide injection to disinfect and remove all biological microorganisms within.

 

Contact your Chemfil service rep today for a formal quote.

original

EZ GUARD™ 8570 TOTAL CLEAN

EZ GUARD™ 8570 Total Clean represents a new generation of scale removers and industrial strength cleaners.

DESCRIPTION

  • EZ GUARD™ 8570 Total Clean represents a new generation of scale removers and industrial strength cleaners.
  • The major ingredient is an acidic organic salt which provides hard water scale removal capabilities exceeding those of most mineral acids.
  • EZ GUARD™ 8570 Total Clean is an excellent replacement product as it is much safer to use than hydrochloric acid, safer, easier and more economical than sulfamic acid and does not generate the fumes and other hazards associated with traditional acid cleaning.
  • EZ GUARD™ 8570 Total Clean is relatively innocuous to humans and is classified as a mild skin irritant.

 

ADVANTAGES

  • EZ GUARD™ 8570 Total Clean contains inhibitors and dispersants to facilitate deposit removal with minimal effect on system metallurgies.
  • EZ GUARD™ 8570 Total Clean is formulated for use in cleaning cooling towers, evaporative condensers, boilers, heat exchangers and other vessels/systems where hard water scales present problems.

 

Contact your Chemfil service rep today for a formal quote.

original

EZ GUARD™ 8585

EZ GUARD™ 8585 is a citric acid based blended cleaner at neutral pH.

DESCRIPTION

  • EZ GUARD™ 8585 is a citric acid based blended cleaner at neutral pH.
  • EZ GUARD™ 8585 can be used for many different applications including as a steel and copper corrosion inhibitor, foam suppressant and a dispersant-penetrant.
  • EZ GUARD™ 8585 is mainly used in closed loop applications in removing scale, deposits, and various forms of iron oxides.

 

ADVANTAGES

  • EZ GUARD™ 8585 is effective in removing scale deposits in both open and closed loop systems.
  • As an acidic solution, the chelant properties also help with the removal of significant iron oxide deposits.
  • EZ GUARD™ 8585 is a neutral solution so it can be disposed of to waste as is.

 

Contact your Chemfil service rep today for a formal quote.

original

EZ GUARD™ 8588

EZ GUARD™ 8588 is a neutral pH cleaning degreaser, formulated to remove oil, grease, and particulates in new or retrofit installations prior to operation.

DESCRIPTION

  • EZ GUARD™ 8588 is a neutral pH cleaning degreaser, formulated to remove oil, grease, and particulates in new or retrofit installations prior to operation.
  • EZ GUARD™ 8588 is designed for use in chilled and hot water loop installations where rapid circulation will ensure good contact and provide scouring action.
  • Heating up EZ GUARD™ 8588 in solution while circulating will enhance degreasing performance if needed.

 

ADVANTAGES

  • EZ GUARD™ 8588 is biodegradable, environmentally friendly and is safe for all metallurgies at use concentrations.
  • EZ GUARD™ 8588 is a neutral solution so it can be disposed of to waste as is.

 

Contact your Chemfil service rep today for a formal quote.

original

EZ GUARD™ 8676

EZ GUARD™ 8676 is a blended liquid corrosion inhibitor formulated for use in closed hot and chilled water systems.

DESCRIPTION

  • EZ GUARD™ 8676 is a blended liquid corrosion inhibitor formulated for use in closed hot and chilled water systems.
  • EZ GUARD™ 8676 is helpful in passivation processes to sufficiently protect piping and equipment from further iron and mild steel corrosion.

 

ADVANTAGES

  • EZ GUARD™ 8676 protects both ferrous and non-ferrous system components.
  • The formulation involves an azole component that can also protect it from copper corrosion.

 

Contact your Chemfil service rep today for a formal quote.

original

EZ GUARD™ 8686

EZ GUARD 8686 is a multi functional, highly concentrated liquid corrosion inhibitor that involves a blend of several inhibiting compounds in one.

DESCRIPTION

  • EZ GUARD 8686 is a multi functional, highly concentrated liquid corrosion inhibitor that involves a blend of several inhibiting compounds in one.
  • When properly used, it will provide excellent iron and copper protection as desired.
  • EZ GUARD 8686 can be used for various closed hot and chilled water systems.

 

ADVANTAGES

  • EZ GUARD 8686 is environmentally friendly and protects both ferrous and non-ferrous system components.
  • It is suitable for water and/or glycol solutions.

 

Contact your Chemfil service rep today for a formal quote.

original

EZ GUARD™ 9213

EZ GUARD™ 9213 is a concentrated all-in-one blend of sulfite, metal passivation and neutral amine controlling agents for steam boilers.

DESCRIPTION

  • EZ GUARD™ 9213 is a concentrated all-in-one blend of sulfite, metal passivation and neutral amine controlling agents for steam boilers.
  • These controlling agents are able to maintain adequate boiler water quality for all types of applications.
  • EZ GUARD™ 9213 is supplied as a concentrated liquid for ease of feed and control.
  • It is recommended for use in systems with up to 600 psi pressure and a low to moderate hardness levels in the feedwater.

 

ADVANTAGES

  • EZ GUARD™ 9213 incorporates advanced metal passivation and neutral amine technology which provide corrosion protection.
  • This type of chemical treatment will benefit the use of the boiler as solid deposition and blowdown will be reduced, thus maintaining consistent operation of the system.
  • EZ GUARD™ 9213 is an environmentally friendly, non-toxic product and will meet environmental discharge standards.

 

Contact your Chemfil service rep today for a formal quote.

original

EZ GUARD™ CHLORINE 12

EZ GUARD™ CHLORINE 12 is a strong concentrated disinfectant for laundry, health care facilities, food processing and beverage plants.

DIN: 02460696

FOR HEALTH CARE FACILITIES, FOOD PROCESSING AND BEVERAGE PLANT USE

APPLICATION:

FOOD PROCESSING AND BEVERAGE PLANTS: For use as a disinfectant on hard surfaces (countertops, processing surfaces, walls and floors), make a solution using 20 ml of EZ Guard™ Chlorine 12 with 10 litres of water. This solution will have >200 ppm of available chlorine. The disinfectant must be in contact with the surface for 10 minutes. All surfaces that come into contact with food are to be rinsed with potable water after disinfection. AVOID CONTAMINATION OF FOOD.

HEALTH CARE FACILITIES AND FIRST AID ROOMS: For use as a disinfectant on hard surfaces (walls, floors, countertops), make a solution using 20 ml of EZ Guard™ Chlorine 12 with 10 litres of water. This solution will have >200 ppm of available chlorine. The disinfectant must be in contact with the surface for 10 minutes. All surfaces are to be rinsed or wiped off after disinfection.

LAUNDRY: Not for use as a laundry disinfectant. For use on hospital linens dilute 40 – 50 ml of EZGuard™ Chlorine 12 in 1 litre of water. This solution will have >4000 ppm of available chlorine. Add the dilution to wash water before adding laundry.

 

original

EZ GUARD™ INHIBITED GLYCOL 6805

EZ GUARD INHIBITED GLYCOL 6805 is a concentrated liquid blend of treatment chemicals used in glycol-water systems.

DESCRIPTION

  • EZ GUARD INHIBITED GLYCOL 6805 is a concentrated liquid blend of treatment chemicals used in glycol-water systems.
  • EZ GUARD INHIBITED GLYCOL 6805 contains a phosphate based inhibitor which is effective in preventing corrosion in HVAC, food processing, and heat transfer equipment.
  • Its passivating and maintenance capabilities make it a sufficient mixture to use for closed loops.

 

ADVANTAGES

  • EZ GUARD INHIBITED GLYCOL 6805 is a non-toxic, environmentally friendly chemical which is suitable for any ethylene glycol systems.
  • Its prolonged service life minimizes potential for acid degradation, protecting metal surfaces from corrosion.
  • EZ GUARD INHIBITED GLYCOL 6805 comes high in purity and meeting ASTM 1177 standard for antifreeze grade.
  • It is a preferred fluid to use by many equipment manufacturers, meeting specifications for corrosion and bacterial limits in chilled/heated loops.

 

Contact your Chemfil service rep today for a formal quote.

original

EZ GUARD™ SERVICE PLAN

Through our technical expertise, we will provide onsite testing, analysis and recommendations to improve the heating and cooling system, ensuring that efficiency for all equipment is maximized, while keeping costs minimized.

DESCRIPTION

Through our technical expertise, we will provide onsite testing, analysis and recommendations to improve the heating and cooling system, ensuring that efficiency for all equipment is maximized, while keeping costs minimized.

 

WATER TREATMENT SERVICE PROGRAM

Our technical service contract for the water treatment program includes testing the process water for the onsite heating and cooling or glycol systems. The duties will include:

  • Monthly site visit by one of Chemfil’s Field Service Engineers
  • Monthly sampling and testing performed by our field engineers and/or in our ISO certified lab
    • Conductivity, pH, inhibitor, alkalinity, total hardness, dissolved metals, bacteria/mould
    • Calibrating and configuring cooling tower controller for improved performance
  • Monthly report emails with recommendations and corrective actions based on testing results
  • On call technical support 24/7 at no-charge
  • Managing and maintaining inventory for chemical treatment
  • Presenting continuous improvement suggestions
  • Quarterly corrosion coupon testing (optional/extra charge)

 

We can set up our monthly service contract depending on the type and number of systems involved. Corrosion coupon testing which takes 3-5 months in the system will be an addition to the monthly service duties and is optional for all customers.

Contact your Chemfil service rep today to set up this service plan!

original

EZ KLEEN™ 99M

EZ KLEEN™ 99M is a neutral pH rust removing cleaner for industrial and commercial water systems.

DESCRIPTION

  • EZ KLEEN™ 99M is a neutral pH rust removing cleaner for industrial and commercial water systems.
  • This product is a sequestering agent, eliminating any corrosion and corrosion by-products in predominantly iron systems.
  • EZ KLEEN™ 99M is a one-time use cleaner that is typically used before commissioning or decommissioning water systems.

ADVANTAGES

  • EZ KLEEN™ 99M is a concentrated solution using neutralized di-phosphonic acid technology.
  • It will selectively dissolve iron oxide from deposits and is inhibited to prevent any reactions with the base metals in the system.
  • EZ KLEEN™ 99M, being neutral in pH, is an environmentally friendly, non-toxic product and will meet environmental discharge standards.

 

Contact your Chemfil service rep today for a formal quote.

Pages: